IN9800-A12-IN
IN9800-A12-IN
- Supports Layer 2 and Layer 3 multicast protocols including PIM-SM, PIM-DM, PIM-SSM, MLD, and IGMP Snooping
- Supports MAC address authentication, 802.1x authentication, and PORTAL authentication
- Built-in authentication server with dynamic or static binding of user accounts, IPs, MACs, VLANs, and ports
- Supports VSM virtualization technology for flexible resource scheduling
- Supports IPv4/IPv6 dual-stack and IPv6 over IPv4 tunnels
- Supports IPv6 Layer 3 line-speed forwarding
- Supports master control redundancy, fan redundancy, N+1 power supply, uninterrupted reboot, and hot patching
- Supports BFD and OAM for device-level and network-level fault detection
- Supports dual air duct design for improved heat dissipation efficiency
- Supports hot-plug for all boards
Specifications
| IN9800-A12-IN | |
|---|---|
| Hardware Specification | |
| MPU Slots | 2× Half-width slot |
| SFU Slots | 2 |
| Module Slots | 10 |
| Switching Capacity | 9.6 Tbps |
| Forwarding Performance | 5713.92 Mpps |
| Fan Slots | 2 |
| Cooling Fans | 12 |
| Air Inlet and Outlet Direction | Left and right ventilation |
| Power Slots | 4; 1 to 3 service boards recommend 2 power supplies; 4 to 8 service boards recommend 3 power supplies; 9 to 10 service boards recommend 4 power supplies |
| Power Supply | 110V AC to 240V AC, 50/60Hz |
| Max Power | 650W |
| Dimensions (W×D×H) | 442 × 480 × 703 mm, 16U |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 5% to 95%, non-condensing |
| MTBF | >200000h |
| Weight | Empty Frame: ≤49.1kg; Fully Loaded: ≤150kg |
| Software Specification | |
| Layer-2 | VLAN, STP, RSTP, MSTP, QinQ, flexible QinQ, VLAN Mapping, full duplex traffic control, back pressure traffic control, link aggregation with 128 aggregation groups and up to 8 members per group, cross-board link aggregation, cross-board port/flow mirroring, storm suppression, Jumbo Frame, VLAN division based on port/protocol/subnet/MAC, PVLAN, GVRP, CoS priority |
| Layer-3 | IPv4: Static routing, RIP v1/2, OSPF, ISIS, BGP, policy-go-together; IPv6: IPv6 static routing, RIPng, OSPFv3, ISISv6, BGP4+, IPv4 to IPv6 transition tunnel technology |
| Data Center | 802.1Qbg, DCB, mainstream Overlay standards such as VXLAN, OpenFlow 1.3 |
| Virtualization | VSM (Virtual Switching Matrix) N:1 virtualization technology; service chain technology; IP-based unified management between host and service modules with unified configuration interface |
| Reliability | Master control board 1+1 redundancy; power N+1 redundancy; passive backplane design; all boards support hot-plug; online status monitoring of master control engine, backplane, chip, and storage |
| Multicast | IGMPv1/v2/v3, IGMPv1/v2/v3 Snooping, PIM-SM/PIM-DM/PIM-SSM |
| ACL | ACL rules based on source IP, source port, destination IP, destination port, protocol number, and physical port |
| Maintenance | FTP, TFTP, X-modem, Web management port, SNMP v1/v2/v3, RMON, NTP clock, intelligent power management |